Security Systems 2

Already our metal-detector-gate-frames, hand-held unit metal-detectors and metal-detectors are used by authorities, security-companies and foreign armed forces in various application areas.

The offered metal-detector-gate-frames and hand-held unit metal-detectors are also used effectively and because of their high reliability widely preferred in the services sector.

MEL1799

With its 8 overlapping zones the metal-gate-probe MEL 1799 is able to detect and accordingly can indicate metals in different heights. The metal-gate-probe MEL 1799 has already 11 different preset programs, aligned to the biggest airports when it is delivered.

MEL 1797

Probes are modern instruments for inspection, used in many fields of safety features and equipment. Weak spots are the problem of yesterday, because the metal-gate-probe MEL 1797 detects dangerous metallic items. It ensures efficient inspection of large number of people. Thereby manual searching is reduced to the necessary dimension.

MEL 6500

The metal-detector-gate-frame MEL 6500 has a multidimensional coil-structure. The multi-coil-control (or circuit) reduces the sensitivity towards interferences from outside.

The MEL 6500 complies or overtops the highest safety-requirements of American safety-authorities. Worldwide the MEL 600 is one of the latest and trustiest metal-detector-gate-frames.

MEL 5500

The metal-detector-gate-frame MEL 5500 convinces by a maximum pass-frequency with multidimensional scanning. The improved detection-capacity indicates on which side the object has been collected. The absolute consistent scanning-fields eliminate so called „hot-spots“. Microprocessors in scanner and controller add up to upper sensitivity to find weapons.

MEL 1605

At home and abroad at many airports they are part of the daily picture of inspecting people.  They also apply at the police, the range of justice and at generally safety measures on events.

The Cloverleaf-hand-held-probe MEL 1605 is the result of a considerable design-study. At this, technical functions and handling were reasonably combined. The robust lightweight construction allows a comfortable long-lasting inspection-work. The airport-design of the Cloverleaf-hand-held-probe MEL 1605 is one compact closed unit, which has no parts to disassemble and is charged externally. The standard-design is hard-faced with changeable commercial (standard) dry cell batteries or loadable batteries.

MEL 1607

At airports they are part of the habitual picture of inspecting people. Further on they are used in embassies, in the industry, at events as well as in the range of police and execution.

Beneath the beneficial handling the significant characteristics of the hand-held-probe MEL 1607 are the safety of operation and a high degree of equipment dependability in long-lasting and large scale operations. There, the robust metallic construction and the special technical concept showed new benchmarks of quality.

On request the detector can be delivered with a cylinder-scanner, which allows an accurate location of very small metallic items. It has shown that the Z-design is particularly suitable for detailed inspections in the range of execution.

MEL 1612

The hand-held-probe MEL 1612 is a handy compact closed unit. It consists of the ring-probe and the hand-held duct. In addition the hand-held duct of the MEL 1612 has a soft plastic coating. The MEL 1612 can also be delivered with a cylinder-scanner.

At the MEL 1612 the press switch and charging-connector are placed counter-sunk in the hand-held duct. After switching on an automatic alignment to a consistent fixed response sensitivity occurs. The indication of metal occurs visually with a light emitting diode and audible by the Tremollo-Effect. The key of the Tremollo-Effect depends on the mass of the metallic item.

The MEL 1612 has no parts to disassemble. The charging of the integral NiMH battery occurs with a controlled current entry. By this construction, additional costs caused by material-shrinking changing batteries and damages caused by faulty contacts are minimised.

MEL 1400

The hand-held unit metal-detector MEL 1400 was designed as amplification for scanning people and items. If metal is found, the operator is informed by vibrations.

MEL 135

Particularly the MEL 135 is for locating mines, ammunition, provisional (makeshift) explosive-mechanisms, weapons and stolen goods. Also small metallic components, as used for mines-fuses or for Booby-Traps, can be located with the detector.

MEL 136

Where conventional technology breaks down more or less worldwide the MEL 136 can be used under various ground-conditions.

The subscript GC stands for ‘GROUND COMPENSATION’, which for example gives the ability to inhibit the parasitic drag of volcanic grounds or grounds of the tropical laterite. That is why it is widely preferred regardless of using the detector in Europe or in tropical countries.